Skip to main content

BESS.TGV

Innovative side-wall deflagration venting for ultimate flexibility.

REMBE® BESS.TGV
Deflagrations must always be vented to a safe location. Conventional deflagration vents can therefore only be installed on the roof of a BESS, venting the deflagration upwards. The revolutionary BESS.TGV by contrast can be installed on a BESS side wall, as it deflects the deflagration upwards by limiting the opening angle of the vent panel.
Application
BESS.TGV helps BESS designers move beyond conventional deflagration venting through the roof, and towards more flexible design opportunities while meeting safety requirements. It eliminates concerns with roof venting such as snow loads and hail impact, and frees up valuable roof area. Container stacking is made possible.
REMBE BESS.TGV

BESS.TGV

Modul to reduce hazardous areas.

BESS.EGV

Explosion vent for BESS
Roof-mounted deflagration venting as the most economical solution.
Advantages
  • Limits opening angle to 45°.
  • Reduced safety area.
  • Side-wall installation at BESS.
  • Uniquely slim profile < 15 mm: Blends in with the container walls, allows container to be stacked.
Mechanism
BESS.TGV limits the opening angle of the explosion vent and guides the explosion pressure wave, flames and heat into defined areas. This minimises the size of the safety areas required.
Technical data
Product parameters
Burst pressure Pstat
25-500 mbar
Max. permitted operating pressure
50 % of Pstat
Temperature
–40 to +180°C (–40 to +356°F)
Material
Stainless steel
Gasket material
FDA approved silicon gasket
Tolerance
± 20 % at standard burst pressure
Recommended torque for M10 screws
20 Nm
Insulation
FEF
Fire rating of insulation
UL 94 V 0
Insulation properties
λ= 0.035 W/m*K
Opening angle
45°
Our specialists will be pleased to assist you in finding a solution that matches your specific operating conditions.
Applications + Industries
  • Battery Energy Storage Systems (BESS)

Certifications

Meets the  requirements of  NFPA 68

Meets the requirements of NFPA 68

SIL-Equivalent

SIL 4

By decreasing the size of dangerous areas, BESS.TGV helps you to reduce your safety areas to a minimum and increase usable operating space while providing optimum protection against explosions.

Click and drag image to view.

Scan the QR code with your iOS camera* to see an AR preview of the product.
BESS.TGV AR Viewer Ru
The dimensions shown may differ from those of the actual product.
* Requires iOS 13, iPadOS 13, ARCore 1.9 or higher.
Any Questions?
We would be happy to show you solutions tailored to your process that limit the effects of an explosion to a harmless level and ensure that production can be resumed quickly after an explosion event.
Consulting. Engineering. Products. Service.
REMBE® Inc.
© REMBE® Inc.