Flameless venting for indoor BESS and sensitive environments.
As the pioneer of flameless venting technology, REMBE® has engineered the first flameless vent for battery energy storage systems. BESS.Q.Vent extinguishes the flame and minimises external temperature and pressure effects. It can protect both indoor and outdoor BESS and can be installed on BESS roofs or side-walls.
Application
BESS.Q.Vent is ideal for protecting BESS located indoors, or outdoor BESS in sensitive environments where flame exit and pressure effects are not acceptable.
Advantages
Flame absorber.
Reduced safety area.
Wall or roof installation at BESS.
Uniquely slim profile: Blends in with the container wall, allows containers to be stacked.
Maintenance-free.
Reduction of external explosion pressures.
Suitable for indoor installation of the BESS.
Mechanism
The special stainless steel mesh filter developed by REMBE® cools the hot flame gases extremely efficiently. This leads to flame extinguishment and further cooling, such that external temperatures and also external pressures are significantly reduced.
Technical data
Product parameters
Burst pressure Pstat
25-100 mbar
Max. permitted operating pressure
50 % of Pstat
Temperature
–40 to +180 °C (–40 to +356°F)
Material
Stainless steel
Gasket material
FDA approved silicon gasket
Tolerance
± 20 % at standard burst pressure
Recommended torque for M10 screws
20 Nm
Insulation
FEF
Fire rating of insulation
UL 94 V 0
Insulation thickness
25-100 mm
Insulation properties
λ= 0.035 W/m*K
Our specialists will be pleased to assist you in finding a solution that matches your specific operating conditions.
Scan the QR code with your iOS camera* to see an AR preview of the product.
The dimensions shown may differ from those of the actual product. * Requires iOS 13, iPadOS 13, ARCore 1.9 or higher.
Any Questions?
We would be happy to show you solutions tailored to your process that limit the effects of an explosion to a harmless level and ensure that production can be resumed quickly after an explosion event.
